MC Hate U by Michał Cacko
Oscillator 1 timbre
Only square oscillators are enabled, resulting in a narrow sounding tone.
Pulse width of square oscillator is set to 50% (50% is perfectly square, 100% is very short pulsewave) and is modulated by Ctrl Seq.
Ctrl Seq mod-matrix 4 modulation amount for pulse width of square oscillator is 86.
Oscillator 2 timbre
Volume level for oscillator 2 is manually set to 255.
Tone for oscillator 2 is set to 71 and is modulated by Mod Wheel.
Mod Wheel mod-matrix 7 modulation amount for tone for oscillator 2 is 127.
Volume (VCA) volume
Amplification level is set to -4.38dB (108) and is modulated by VCA Env.
VCA Env direct modulation amount for amplification level is 255.
Pan spread is manually set to 88.
Noise timbre
Noise level is set to 50 and is modulated by Ctrl Seq.
Ctrl Seq mod-matrix 3 modulation amount for Noise level is 8.
OSC 1→2 sync timbre
to be completed
Oscillator 2 is syncronized to oscillator 1. This generates rich harmonic content when changing oscillator's relative piches.
Low-pass filter (VCF) timbre
Low-pass filter cut-off frequency is set to 20000Hz (255) and is modulated by LFO 2.
LFO 2 mod-matrix 6 modulation amount for low-pass filter cut-off frequency is 16.
Low-pass filter envelope amount is modulated by Note Vel, Note Num.
Note Vel direct modulation amount for low-pass filter envelope amount is 128.
Note Num direct modulation amount for low-pass filter envelope amount is 75.
Filter has no resonance.
Oscillator drift & unison detuning timbre
Unison detune level is set to ±16 cents (83) and is modulated by LFO 1.
LFO 1 mod-matrix 5 modulation amount for unison detune level is 73.
Oscillators drift level is manually set to 52. Drift rate is 9
Oscillator 2 pitch pitch
Oscillator 2 pitch is set to 12 semitones and is modulated by LFO 1.
LFO 1 direct modulation amount for oscillator 2 pitch is 103.
FX routing & levels fx
FX mode is set to Send, and routing is
Effect 1 level is manually set to 100. Effect 2 level is manually set to 100. Effect 3 level is manually set to 49. Effect 4 level is manually set to 26.
Multi-Band Distortion fx
not yet complete
Noise Gate fx
not yet complete
Unknown FX fx
not yet complete
Delay fx
not yet complete
Mod Wheel modulator
Controls OSC 2 Tone Modulation Depth.
| function | type | destination | amount |
|---|---|---|---|
| timbre | matrix | OSC 2 Tone Modulation Depth | 127 |
Note Num modulator
Controls VCF Keyboard Tracking.
| function | type | destination | amount |
|---|---|---|---|
| timbre | fader | VCF Keyboard Tracking | 75 |
Note Vel modulator
Controls VCF Envelope Velocity Sensitivity.
| function | type | destination | amount |
|---|---|---|---|
| menu | VCF Envelope Velocity Sensitivity | 128 |
LFO 1 modulator
Controls OSC 2 Pitch, Multi-Band Distortion Param 2, Unison Detune, VCA Pan.
| function | type | destination | amount |
|---|---|---|---|
| pitch | fader | OSC 2 Pitch | 103 |
| fx | matrix | Multi-Band Distortion Param 2 | 20 |
| timbre | matrix | Unison Detune | 73 |
| volume | matrix | VCA Pan | -21 |
| name | value |
|---|---|
| LFO 1 Rate | 0.47Hz (84) |
| LFO 1 Delay / Fade | 0s (0) |
| LFO 1 Shape | Square |
| LFO 1 Key Sync | off |
| LFO 1 Arp Sync | off |
| LFO 1 Mono Mode | 1 |
| LFO 1 Slew Rate | 159 |
LFO 2 modulator
Controls Noise Gate Param 1, VCF Cut-off Frequency.
| function | type | destination | amount |
|---|---|---|---|
| fx | matrix | Noise Gate Param 1 | 127 |
| timbre | matrix | VCF Cut-off Frequency | 16 |
| name | value |
|---|---|
| LFO 2 Rate | 0.12Hz (37) |
| LFO 2 Delay / Fade | 0s (0) |
| LFO 2 Shape | Triangle |
| LFO 2 Key Sync | off |
| LFO 2 Arp Sync | off |
| LFO 2 Mono Mode | 1 |
| LFO 2 Slew Rate | 0 |
VCA Env modulator
Controls VCA Gain for All Voices.
| function | type | destination | amount |
|---|---|---|---|
| volume | menu | VCA Gain for All Voices | 255 |
| name | value |
|---|---|
| VCA Envelope Attack Time | 0s (0) |
| VCA Envelope Decay Time | 1.13s (128) |
| VCA Envelope Sustain Level | 100% (255) |
| VCA Envelope Release Time | 1.13s (128) |
| VCA Envelope Trigger Mode | Key (0) |
| VCA Envelope Attack Curve | 128 |
| VCA Envelope Decay Curve | 0 |
| VCA Envelope Sustain Curve | 128 |
| VCA Envelope Attack Curve | 0 |
Ctrl Seq modulator
Controls Noise Level, OSC 1 Pulse Width Modulation Depth.
| function | type | destination | amount |
|---|---|---|---|
| timbre | matrix | Noise Level | 8 |
| timbre | matrix | OSC 1 Pulse Width Modulation Depth | 86 |
| name | value |
|---|---|
| Ctrl Sequencer Enable | on |
| Ctrl Sequencer Clock Divider | 7 |
| Sequence Length | 6 |
| Sequencer Swing Timing | 0 |
| Key Sync & Loop | 0 |
| Slew Rate | 0 |
| Seq Step Value 1 | 128 |
| Seq Step Value 2 | 232 |
| Seq Step Value 3 | 128 |
| Seq Step Value 4 | 237 |
| Seq Step Value 5 | 128 |
| Seq Step Value 6 | 128 |